 +86 13506220296
 13506220296
You are here: Home » News » WIRE AND CABLE MACHINE » HOW TO CHOOSE WIRE DRAWING MACHINE

HOW TO CHOOSE WIRE DRAWING MACHINE

Views:14     Author:Site Editor     Publish Time: 2020-04-10      Origin:Site

HOW TO CHOOSE COPPER WIRE DRAWING MACHINE


Recently, many clients enter into copper industry, and don't know how to buy the copper wire drawing machine.

A. You don't need copper conductor bigger than 0.4mm.

Following is the answer:

1)Copper rod breakdown machine without annealing, draw 8mm copper to 3mm.

copper rod breakdown machine

2) Intermediate wire drawing machine without annealing, draw 3mm copper wire to 1mm

Intermediate wire drawing machine

3) Fine wire drawing machine with online annealing, draw copper wire from 1.0mm to 0.1-0.4mm

Fine wire drawing machine with annealing

B. If you need to copper conductor from 0.4-1.6mm, just add annealing machine in intermediate wire drawing machine

C. If you need copper counductor bigger than 2mm, copper rod breakdown machine should add annealing.

In a word, no need annealing copper wire each step, just need to anneal wire in last step.

Tips, if you have large capacity in copper conductor from 0.1-0.4mm, we don't advice you buy fine copper wire drawing machine with online annealing, it's more economic to buy fine wire drawing machine without annealing, and apply annealing furnace annealing one time.

copper wire annealing machine

CONTACT
Add: Juqiao Economic Development Zone, Tangqiao Town, Zhangjiagang City, Jiangsu Province, China.
Tel: +8613506220296

Copyright  © 2016  Jiangsu Jiacheng Technology Co Ltd  All  Rights  Reserved. 
Designed by wonder-tech / Site Map