Language
中文简体
English
عربى
русский
Typical Technical Parameters
LSZH cable equipment centers on extrusion process configuration suited to halogen-free compound characteristics. The table below gives typical parameter ranges for LSZH extrusion equipment.
| Machine Type | Typical Product Range | Max Line Speed | Drive & Control | Typical Motor Power |
| LSZH Insulation Extrusion Line | 0.5-300 mm2 conductor, single-layer insulation | 10-50 m/min depending on gauge and compound | PLC + HMI, LSZH-specific temperature profile | 45-150 kW |
| LSZH Jacket Extrusion Line | finished cable OD dependent | 10-40 m/min | PLC + HMI, compound-specific screw and temperature control | 60-160 kW |
Because LSZH compounds vary somewhat by manufacturer and formulation, and generally require careful temperature control to process well given their higher filler content, we typically confirm your specific compound source and target output speed during technical planning, since this affects the appropriate screw design and temperature profile more than for standard PVC processing.
We are glad to walk through how these parameters compare to a related cable type or performance tier you may already be evaluating elsewhere on our site, since many buyers end up comparing more than one processing category before finalizing a production plan. If your target specification falls between two of the ranges shown here, or requires a combination not directly reflected in the table above, share the details and we will confirm a configuration matched specifically to your case rather than asking you to round up to the nearest standard option. We would also rather flag a genuine limitation in what Low Smoke Zero Halogen (LSZH) Cable Equipment equipment can reliably achieve early in the conversation than let a mismatched expectation carry through to a formal quotation and cause disappointment later.
Matching Equipment to Your Product Line
LSZH cable buyers typically already know their target application (data center, transit, marine, or building infrastructure) and the relevant standard defining smoke density and toxic gas emission limits their cable needs to meet. Our role is to confirm the extrusion equipment configuration suited to processing your specific LSZH compound reliably at your target output.
We discuss your target compound source in detail, since LSZH formulations vary in their processing characteristics, and a screw and temperature profile well-suited to one manufacturer's compound may need adjustment for a different one. We also confirm your target conductor size range and construction, since LSZH is applied similarly to standard PVC or XLPE cable construction but with the compound-specific processing considerations addressed.
If you can share your target application, LSZH compound source, and cable construction, we can propose an extrusion equipment configuration suited to your specification, and flag any aspects of your target compound that call for specific screw design or temperature profile adjustments.
This matching process usually takes a short back-and-forth rather than a single exchange, since buyers often refine their target specification once they see the trade-offs involved in different Low Smoke Zero Halogen (LSZH) Cable Equipment configurations. We treat this as a normal, expected part of specifying equipment correctly, and would rather spend extra time confirming the right match up front than have a buyer discover a mismatch only after equipment has already been ordered and shipped. If you already have a detailed specification document from your own customer, an internal engineering team, or an industry standard you need to meet, sending it to us directly is often the fastest way to get an accurate, well-matched proposal, since it removes ambiguity from the technical discussion.
Quality Control and Certification
LSZH cable quality is judged on both standard insulation performance (wall thickness consistency, electrical properties) and the smoke density and toxic gas emission performance that defines this product category, both of which depend on correct compound processing during extrusion.
Extrusion lines processing LSZH compounds are tested with sample material representative of your target compound, verifying wall thickness consistency and surface quality, since inadequate temperature control can produce visible surface defects or inconsistent insulation with LSZH compounds more readily than with standard PVC. We confirm appropriate screw and temperature settings are established and documented for your specific compound.
We use PLC and drive components from recognized international brands for precise temperature control, given how important consistent processing conditions are to LSZH compound performance. If your target application requires cable meeting a specific smoke density or toxicity standard, share that with us during quotation so we can confirm our equipment's process capability supports meeting it.
We document every quality check performed during manufacturing and testing so the records travel with the Low Smoke Zero Halogen (LSZH) Cable Equipment you purchase, giving your own quality team a documented baseline to reference once the equipment is running in your facility. If your organization has an internal supplier qualification or quality audit process, we are glad to provide additional documentation or answer specific questions as part of that process, rather than only offering our standard test report. We would rather be transparent about exactly what has and has not been verified before shipment than leave you to assume a broader scope of testing than was actually performed, since a gap discovered later is far more disruptive than one addressed clearly at the outset.
Frequently Asked Questions
Q: Can your equipment process any LSZH compound brand, or only specific ones?
A: Our extrusion lines can be configured for a range of LSZH compound sources; share your specific target compound and we will confirm the appropriate screw and temperature profile configuration.
Q: What smoke density and toxicity standards has this equipment been used for?
A: This varies by market and application. Share your target standard and we will confirm whether our equipment configuration is suited to helping you meet its specific requirements.
Q: Can the same line switch between PVC and LSZH production?
A: In many cases yes, with appropriate temperature profile and screw cleaning between compound changes, though dedicated LSZH configuration generally achieves more consistent results.
Q: Does LSZH extrusion run slower than standard PVC?
A: Often somewhat slower given the higher filler content and different processing characteristics of LSZH compounds compared to standard PVC; we will confirm realistic achievable speed for your specific compound.
Q: Is smoke density testing included with the equipment purchase?
A: Equipment testing verifies process performance; finished cable smoke density and toxicity certification testing is typically arranged separately with an accredited testing laboratory.
If your question about Low Smoke Zero Halogen (LSZH) Cable Equipment is not answered here, reach out directly with your specific situation rather than assuming a general answer applies to your case; because equipment specification depends so heavily on your exact target cable, application, and standard, many of the most useful answers are specific to your project rather than universal. We would rather take the time to answer a specific question accurately, even if that means asking you a few clarifying questions first, than give a generic response that sounds complete but does not actually apply to what you are trying to build.
Price Range and Quotation Process
LSZH cable equipment pricing is generally comparable to standard PVC extrusion equipment of similar output capacity, with the main consideration being appropriate screw design and temperature control precision suited to your specific LSZH compound rather than a fundamentally different or more expensive machine category.
To prepare a quotation, we typically need your target application, LSZH compound source, conductor size range, and your target output. With this information we usually return a formal quotation with proposed equipment configuration and lead time within a few business days.
If you are transitioning from standard PVC to LSZH production for an existing product line, we are glad to discuss whether your current equipment can be reconfigured for LSZH processing or whether a dedicated line would better serve your specific compound and output requirements.
We recognize that different buyers are at different stages of planning, from early budget research to a final purchasing decision, and we are happy to provide a general pricing indication for Low Smoke Zero Halogen (LSZH) Cable Equipment even before you have finalized every technical detail, so you can gauge whether this category of equipment fits your overall project budget before investing more time in a detailed specification. If your budget research is still at an early stage, say so directly and we will tailor the level of detail in our response accordingly, rather than pushing for a full technical exchange before you are ready to have that conversation. As your project firms up, we can refine the quotation together step by step rather than starting the process over from the beginning.
